gas flow sensor

Quick Details Product Name: Incorporate Type Electromagnetic Flowmeter Nominal diameter: 15-2000mm Velocity range: 0-10m/s Degree of accuracy: ±0.5%R, ±1%R ( < DN20) Nominal pressure: 1MPa (DN15-DN800), 1.6MPa(DN15-DN800), 2.5MPa(DN15-DN600) Sensor: 0℃- +80℃ or -25℃- +120℃ or +70℃- +250℃ Incorporate type: -10℃- +55℃ Output signal: 4-20mA, Pulse/Frequency 2kHz(Default), 5KHz(Max) Supply voltage: 110/220VAC (100-240VAC), 50Hz/60Hz; 24VDC±10% Digital communication: RS-485, support standard Mudbugs-RTU protocol; GPRS Product Description The PMF Electromagnetic flowmeter is composed of the sensor and convertor, and the sensor consists of measuring tube, electrodes, excitation coils, iron core and shell ...

Introduction The product control panel is designed with modular design, with complete functions, simple structure, convenient operation and so on. Can be widely used in petroleum, chemical, pharmaceutical, transportation, food industry and commerce. The screen is a digital liquid crystal display, the screen is divided into three lines: the top line is regarded as the current measurement data, the next line of the cumulative data. Technical parameters Key Opertion Instruction 1.. On the left CLEAN key, starting and cleared, in the middle of the START key, set up, the right for the TOTAL key, the total amount of display and class total display 2, start: press ON/CLEAN key to boot, or the sensor has a measurement pulse, can be switched on. The machine automatically shut down 4-5 minutes without any operation.. 3 view total: in the normal display state press TOTAL key, the screen display TOTAL, the following row of figures is the total cumulative. 10 seconds after the automatic return to normal display. 4 when the data is clear, in the normal state of the display, press ON/CLEAN to clear when the data. 5 clear class total: in the normal display state press TOTAL button, when the screen display TOTAL, the following row shows the figure is the total cumulative, press TOTAL key again, showing a total flash, then press ON/CLEAN button to clear the value, return to normal after 3 seconds. 6. Adjustment coefficient in the normal state, not counting pulse, waiting for 5 seconds, press the start button to keep 5 seconds, entering coefficient adjustment mode, this row display has some coefficient, a flashing. Press ON/CLEAN button to 'Add', press TOTAL key to 'minus', according to the START shift, after modification, long press START wait for 1 seconds, save the revised value, and return to normal display. If you do not operate, after 30 seconds will automatically return to normal display. The modification is based on the actual measured value and display value, the actual value divided by the display value, and then multiplied by the existing coefficient is to modify the value of the. Simple generalization: when the system is large, the relative oil will be reduced. System to minor. Oil will increase. Working Principle 1. flow meter installed in the oil pump outlet, if ...

Quick Details Material: Aluminum Size: BSPT 3/4" 1/2" Accuracy: ±0.5% Connection: Thread Working Pressure: 0.8MPa Product Description Specifications aluminum oval gear meter has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability,applying in the petroleum,chemical,food industry, etc.Various displays to meet different requirments.Amount, Volume,Unit price. Advantage: High accuracy;Compact size;Easy maintenance;Easy to read and operate LCD display;Horizontally and vertically flexible installation options;Low pressure drop; Various displays to meet different requirment. FAQ Q1. What is your terms of payment? A: T/T 30% as ...

Basic Info Measuring Media: Liquids, Steam, Gases Measuring Principle: Velocity Measurement Object: Closed Pipeline Certification: JIS, DIN, ANS, CE, ISO Connection: Wafer or Flange Diameter: Dn15~500 (1/2~20inches) Output: 4-20mA, RS485; Hart Delivery Time: 5-7 Working Days Medium: Liquids, Steam, Gases Certificate: Atex Transport Package: Carton / Wooden Case Specification: GB/ANSI/DIN/JIS Summary With on-site display function, Can be connected into the internal or external sensor and integrated to flow meter with temperature, pressure compensation function, With HART protocol advanced features. Intelligent circuit according to the characteristics of vortex sensor, ...

Basic Info Measuring Media: Liquids, Steam, Gases Measuring Principle: Velocity Measurement Object: Closed Pipeline Certification: JIS, DIN, ANS, CE, ISO Connection: Wafer or Flange Diameter: Dn15~500 (1/2~20inches) Output: 4-20mA, RS485; Hart Delivery Time: 5-7 Working Days Medium: Liquids, Steam, Gases Transport Package: Carton / Wooden Case Specification: GB/ANSI/DIN/JIS Product Description Digital Vortex Flow Meter, Pipe size is from 15mm to 500mm Accuracy is ± 0.5% or ± 1.0% Max pressure ≤ 4.0Mpa, Medium temperature 50- +350ºC, Explosion-proof is ExdIIBT4/ Exib IICT4, Output signal: 4-20mA; RS485; HART. Our Digital ...

Basic Info Model NO.: flow meter Application: Industrial Production Measuring Media: Liquid Repetability: ±0.25%Fs Medium: Air,Liquid Transport Package: Carton Origin: China Main Application: Fuel Oil, Corrosive Liquid/Gas Type: Panel Rotameter Certification: RoHS Float Material: 316 Stainless Steel(≥150gpm 304stainless Steel) Product Description Our series Panel Type Flow meter is also called the variable-area flowmeter. The material of measuring tube is made of Highquality and transparent lucite (acrylic). This flowmeter is mainly applied to form a complete set in dean water treatment and environmental protection projects. It also can be ...

Basic Info Main Application: Water, Wastewater, Corrosive Liquid/Gas Sensor: Clamp-on/External Type: Electromagnetic Flow Meter Measuring Principle: Electrical Principles Caliber : Dn10-Dn3000 Protection Level: IP65, IP67, IP68 (Optional) Origin: China Feature 1)No moving parts,virtually No pressure loss 2)Corrosion protection,Abrasion resistant 3)High accuracy,stable performance 4)Mult-Output interfance 4~20mA,Pulse,Alarm outputs,RS-485,Modbus Communication Product Specification About US Our Advantages and why choose us: Fast delivery & Cheap freight cost and best service team 1)Delivery in time,delivery time is 7 days for sample and 15 working days for bulk order 2)Delivery way: UPS, DHL, TNT, FEDEX, EMS, ...

Quick Details Product Name: Turbine Flow meter Medium: Liquid, Gas Accuracy: 0.2%;0.5%;1.5% Power Supply: +24VDC; Lithium battery Output: Pulse ; RS485 Nominal Diameter: DN4~DN500 Nominal Pressure: PN0.6 ~ 16MPa MediumTemperature: ≤120℃ Explosion Proof: Exia II CT4 ~ T6, Exd II BT4 ~ T6 Connect: Flange, thread intelligent turbine flow meter 1.Adopting advanced single-chip technology with powerful overall performance and high precision operation. 2.The convertor dopts laminated structure, easy to disassemble, easy maintenance, free debugging. 3.Adopting micro-power technology. 4.Can display the total amount and instantaneous flowrate of the liquid ...

Quick Details Product Name: Threaded digital turbine water flow meter sensor Nominal diameter(mm): 4~32 Accuracy: ±0.2% ±0.5%, ±1% Transmission distance: ≤1000m Ambient temperature: -10~55℃ Relative temperature: 5%~90% Barometric pressure: 86~106Kpa Power supply: +12VDC ,+24VDC(optional) Protection grade: I P65 Meter body: 304 stainless steel Product Description Threaded digital turbine water flow meter sensor 1is a precise flow measurement instrument and can be used to measure the flow and volume of liquid, supporting the corresponding flow totalizer instrument .. Explosion-proof design structure, this product can display the total flow, instantaneous ...

Quick Details Model Number: customization Product Name: Flow Indicator Size Range: DN6mm to DN100mm Max Operating Pressure:: 1.5MPa/16Bar Medium: Oil/Liquids/Solvent/Steam Material: 304 Stainless Steel/PTFE/Tempered Glass Thread Standard: NPT,BSPP,BSPT Customization: Available MOQ: one piece Production Process: Mold Casting Delivery Time: Within Seven Days(100Pcs) he impeller indicator is also known as a necessary accessory for observing the flow of medium in the pipe. Impeller sight glasses are widely used in petroleum, chemical, chemical fiber, medicine, food and other industrial production equipment, can observe the flow of liquid, gas, steam medium ...

Quick Details Category: MJ-HZ41CF Flow sensors Lead Free Status: Lead free / RoHS Compliant Condition: Brand New With Original Manufacturer Maximum Operating Temperature: -40C ~ 125C Warranty: 360days Operating Temperature: -40C ~ 125C Dissipation Power: 1W-6W Application: Watch Product Description The main flow of the turbine rotor assembly of the switch housing, the magnetic rotor, the brake ring. When using the flow switch mode, its performance is superior to mechanical pressure plate structure, and the size was significantly reduced. When switching the flow through the turbine housing, pushing ...

Quick Details Material: Aluminum; enginering plastics Certificate: CE; ISO MOQ: 1pcs Packing: 51*26.5*22.5cm Carton / 2pcs Payment terms: T/T Color: Blue Sensor: Reed; Hall Accuracy: 0.5% Flow range: 30-300 lpm Max pressure: 1.8Mpa Product Features CE approved Alu gear and body Max pressure 1.8Mpa Flow range, min. 30 l/min, max. 300 l/min Compatible with gasoline, diesel, kerosene as well as food industry Carton size: 51*26.5*22.5cm / 2pcs per carton / G.W. 15KG / N.W. 13KG Products cover as below Manual Nozzle with Flow Meter Automatic Shutoff Fuel Nozzle Automatic ...

Basic Info Structure Type: Measuring Core Output Signal Type: Pulse Material: Nylon+Glass Fiber IP Rating: IP68 Customized: Customized Working Temperature: 0~60c Trademark: Bingo Specification: 1-60L/min HS Code: 9026900000 Type: Flow Sensor Measuring Medium: Drinking Water Production Process: SemiConductor Integrated Accuracy Grade: 0.1G Certification: CE Contact Capacity: DC 5-24V Protection Grade: IP68 Transport Package: Carton Product Description The main water flow sensor by copper body and plastic forming, water flow rotor components, steady flow components and hall components. It into water dispenser, coffee machine and household appliances the water ...

Quick Details Material: POM Food Grade Color: White Flow Range: 0.25-2.5L/min Connection: 6mm, straight structure specifictation: 80*42*32mm or 62*42*32mm Flow conversion: 1L Water=2653 pulse pressure performance: 0.8MPA Line specification and install direction: could be Customized water temperature: less than 60 ℃ insulated resistor: >100MΩ Technical parameter 1.Water quality requirement: Drinking water health standards, 0～60℃ 2.Flow range: 0.25～2.5L/min (three types to be optional) 3.Withstand hydraulic pressure: ≤0.8MPa 4.Voltage/electric current: DC4.5～18V,≤10mA; can be customized DC24V 5.Insulation resistance: >100MΩ 6.Electrical strength: AC500V,50HZ 7.Output level: Rated voltage DC5V,high level ≥4.3V,low level ≤0.5V ...

Quick Details Media Type: Liquid Operating Temperature: -40~+80℃ Connection: G1/2'' Operate Temperature: -10-80C Precision: 0.5-30L/min Flow Pulse: F=18Q±5% Q=L/min Mounting Position: Vertical or Horizontal Output Pulse Duty Cycle: 50%±10% Product description The main water flow sensor by copper body and plastic forming, water flow rotor components, steady flow components and hall components. It into water dispenser, coffee machine and household appliances the water used for measuring the water flow. When water flows through the rotor components, magnetic rotor rotating, and speed along with the flow of a linear ...

Quick Details Connection: G1/2'' (1/2 inches) Voltage: 4.5-24V DC Max. working current: 15mA (DC5V) Circuit load: 10mA (DC5V ) On flow: ≤1L/min Flow pulse characteristics: f=7.5Q, (f:Hz,Q:L/min) Precision: 1-30L/min ±10% Times: 10,0000hours Product Description Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispenser or coffee machine. We ...

Quick Details Media Type: Liquid Operating Temperature: -40~+80°C Flow Rate: 1.5~30L/min Thread size: 1/2" - 1/2" Color: golden Material: Brass Certificate: RoHs Start-up Volume: 1.5L/min Max working rate: 20 L /min Contact Form: NO / Normally open Max switch Voltage: 100 V Max contact rating: 10 W Warranty: 3 Yesrs , 1 x10 ^ 7 times ON-OFF Product Description 1. Thread size: Male1/2" - male 1/2" 2. Certificate : Rohs RoHs 3. Start-up Volume :1.5L/min 4. Max working rate :20 L/min 5. Contact Form : NO / Normally ...