turbine water flow meter

Quick Details Type: Inline Turbine Meter Flow range: 10-120l/min Pressure: 20BAR Connections: 1" BSP(M/F) Increments: 0.1liter Materials: Polyamide Body Polypropylene Gear Accuracy: ±1% Temp Range: from-10℃to+50℃ Display: 5 Digit Reset(10mm) 6 Digit Non-reset Application: diesel fuel, gasoline, kerosene PRODUCT DESCRIPTION digital fuel flow meter is a turbine flow meter, designed for measuring the transfer of low viscosity fluids including diesel, water and windscreen fluid. This diesel flow meter is easy to install either inline or by the delivery nozzle, and are equipped with a display which can be ...

Quick Details Name: Turbine Flow Meter/diesel ,Gasoline ,Air Flow Meter,Flowmeter Nominal Diameter: DN4~DN200 Measured medium: Tap water,alcohol,gasoline,diesel,kerosene,hydraulic oil,LPG Medium temperature: -20~150℃ Connection Form: Flange,Thread,Clamp Instrument material: SUS304,SUS316 Power Supply: 12~24V DC,3.6V Lithium Battery Output: 4-20mA,Pulse,Frequency,RS-485,Hart,RS232 Explosion-proof: ExiaIICT4,ExdIIBT6 Precision Class: ±0.2%,±0.5%,±1% Abstract Turbine flow transducer adapts to measure the liquid rate and total flow rate of low viscosity, it can be widely used in the fields of petrol, chemical industry, metallurgy, scientific research for measuring or control, several output and display methods can be selected. Features (1)Widely measuring range, ...

Quick Details Product Name: Turbine Flow meter Medium: Liquid, Gas Accuracy: 0.2%;0.5%;1.5% Power Supply: +24VDC; Lithium battery Output: Pulse ; RS485 Nominal Diameter: DN4~DN500 Nominal Pressure: PN0.6 ~ 16MPa MediumTemperature: ≤120℃ Explosion Proof: Exia II CT4 ~ T6, Exd II BT4 ~ T6 Connect: Flange, thread intelligent turbine flow meter 1.Adopting advanced single-chip technology with powerful overall performance and high precision operation. 2.The convertor dopts laminated structure, easy to disassemble, easy maintenance, free debugging. 3.Adopting micro-power technology. 4.Can display the total amount and instantaneous flowrate of the liquid ...

Quick Details Product Name: Threaded digital turbine water flow meter sensor Nominal diameter(mm): 4~32 Accuracy: ±0.2% ±0.5%, ±1% Transmission distance: ≤1000m Ambient temperature: -10~55℃ Relative temperature: 5%~90% Barometric pressure: 86~106Kpa Power supply: +12VDC ,+24VDC(optional) Protection grade: I P65 Meter body: 304 stainless steel Product Description Threaded digital turbine water flow meter sensor 1is a precise flow measurement instrument and can be used to measure the flow and volume of liquid, supporting the corresponding flow totalizer instrument .. Explosion-proof design structure, this product can display the total flow, instantaneous ...

Basic Info Measuring Media: Liquid Measuring Principle: Mechanics Measurement Object: Closed Pipeline Certification: CE, RoHS, ISO Display: LCD Temperature: -20c~120c Power Supply: 24VDC or Battery Output Signal: 4-20mA,Pulse Body Materia: Ss304/Ss316 Connection: Flange or Screw Thread Transport Package: Carton/Wooden Case Specification: CE, ISO Main Applications Turbine flow flowmeter adapts to measure the liquid rate and total flow rate of low viscosity, It can be widely used in the fields of Petrol,fuel ,water ,chemical industry,Metallurgy,Scientific research for measuring or control Several output and display methods can be selected. Features ...

Quick Details Pressure: 20 bar Connection: Thread Medium: Diesel, Gasoline Product Description Specifications The flow meter is a speed instrument, it has high precision, good repeatability, simple structure, high pressure, wide measuring range, small size, small weight, small pressure loss. Long life, simple operation, simple maintenance and so on. Used to close the pipe to measure low viscosity, no strong corrosive, clean liquid flow and cumulative volume. Such as tap water, to soften water, deionized water, alcohol, kerosene, gasoline and so on. FAQ Q1. What is your terms ...

Quick Details Item: Water flow meter Structure: Turbine Flow Meter Display: digital flow meter Size: 1" Accuracy: +/- 1% Material: Glass Reinforced Polypropylene Power: 2x1.5V AAA Batteries sample: flow meter yes Features 1. K24 Flow Meters are designed to meet a wide range of product delivery measuring requirements in non-resale applications. 2. For low viscosity fluids, such as Water, Urea, Methanol, Ethanol, Sulfuric acid, Diesel Fuel, Kerosene etc. 3. Easy to install, in line or at the end of a delivery pipe or behind the nozzles. 4. Equipped ...

Quick Details Name:: High Quality Hydraulic Oil Flow Meter Accuracy: ±1%R; ±0.5%R; ±0.2%R Protection Class: IP65 or IP68 Explosion class: EXIA II CT4 Medium: Non Corrosive Liquid Diameter Nominal: DN4~DN200 Communication: RS-485,MODBUS-RTU Sensor: +12V DC (Optional: +24V DC) Pressure: 86 to 106 KPa Output: 4- 20 mA ,Pulse ,battary,RS485 Product information Sensor selection In general,the sensor caliber should be determined based on the normal flow range,according to the operating conditions.If the diameter of the pipe is inconsistent with the diameter of the sensor, consider expanding or constricting to ...

Quick Details Product Name: stainless steel deionized water turbine flow meter sensor Accuracy: ±0.5% Power supply: 100-240VAC, 50/60HZ Application: Measuring Fluid Output: 4-20mA/Pulse Ambient Temperature: -10℃~120℃ Conductivity: water 20μS/cm other medium 5μS/cm connection type: flange, tri-clamped, union type Product Feature 1.The sensor is with hard alloy bearing thrust type, which may guarantee the precision and improve the wear resistance 2.performance as well. Digital Hydraulic Turbine Diesel Flow Meter 3.Simple and firm structure, easy for installation and dismantling. 4.Wide range of measuring with very lower flow velocity limit. 5.Small ...

Specification Parameters Name:Water Flow Senser Product item no. : FS300A G3/4" Flow Range:1-60 L/min Material : Plastic Working Pressure:<1.20/Mpa Function : Sensor , flow rate control Thread size : MaleG 3/4" 2.59cm Size:L 67X38MM x 3/4" Male thread 2.59cm Color : Black Weight:66g Flow Pulse: F(Hz)=(5.0xQ) -3% Q=L/min Max. Working Current : 15mA (DC5 V) Min. Working Voltage: DC 4.5V Working Voltage:DC 3V~24V Load Capacity: =10 mA (DC 5 V) Operating Working Temperature : -25 Degree centigrade to +80 Degree centigrade Material Temperature: 120 Accuracy : 2%~5% Feature ...

Quick Details Category: MJ-HZ41CF Flow sensors Lead Free Status: Lead free / RoHS Compliant Condition: Brand New With Original Manufacturer Maximum Operating Temperature: -40C ~ 125C Warranty: 360days Operating Temperature: -40C ~ 125C Dissipation Power: 1W-6W Application: Watch Product Description The main flow of the turbine rotor assembly of the switch housing, the magnetic rotor, the brake ring. When using the flow switch mode, its performance is superior to mechanical pressure plate structure, and the size was significantly reduced. When switching the flow through the turbine housing, pushing ...

Quick Details Product Name: Brass Hall Turbine flow sensor meter switch control water Flow Rate: 1~25 L/min Flow Pulse: F= 11 *Q ± 5% , Q=L/min Working Voltage: DC3V-24V Working Current: 15mA Suffering Pressure: Max: 1.5MPa Working Temperature: -40 °C ~+80 °C, Min Insulation Resistance: 100M Ohm Application: Water heater, broiler and heat pump ...etc. Description The water flow sensor is a device used to sense the water flow rate in a tank. There is a Hall element in the flow sensor. When liquid flows by the sensor, ...

Quick Details Connection: G1/2'' (1/2 inches) Voltage: 4.5-24V DC Max. working current: 15mA (DC5V) Circuit load: 10mA (DC5V ) On flow: ≤1L/min Flow pulse characteristics: f=7.5Q, (f:Hz,Q:L/min) Precision: 1-30L/min ±10% Times: 10,0000hours Product Description Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispenser or coffee machine. We ...

Quick Details Model Number: LWQ-50A Flow Meter: Turbine Flow Meter Measurement Range Rate: 1:10,1:15,1:20 Medium Temperature(℃): -20 ~ +120 ℃ Application: water,oil etc Description Turbine Flow Meter is a main type of Impeller Flow meters also including the Anemoscope and Water meter. It is made up of Sensor and Conversion-Show. The Sensor reacts to the average velocity of fluid with multi-blades rotor so as to speculating the flow value and the accumulative flow value. Measurement range and Working pressure Our Services 1. We can provide different kinds of ...