water pump pressure switch

Quick Details Name: Hydraulic digital pressure gauge range: -1~0 bar, 0~60MPa output: 4-20ma or customer tailor accuracy: 0.25%FS, 0.5%FS, 1.0%FS power supply: 3V baterry power supply (5# ) diaplay: 4 digital LED display Over load: 2*FSO process connector: M20*1.5, pressure plate or customer tailor operating temperature: -15℃- +70℃ Diameter: 100mm Description ZH-S200 intelligent digital pressure gauge is a high precision indicator, with ultra high precision pressure transmitter inside, it can display pressure very quickly and accurately. What’s more, it is of high precision, long term reliability, etc. It ...

Basic Info Number of Switch: Multi Control Switch Explosion-proof Type: Flameproof Contact Type: Type c Contact Temperature: -40° C to ~ 120° C Thread: 1/8NPT, 1/4NPT, G1/8, G1/4 Transport Package: Neutral Export Carton HS Code: 8536500000 Type: Mechanical Structure: Power Built-in Type Contact: Normally Open Medium: Air, Oil, Water, Max. Pressure: 500psi Product Description PS-M4 pressure switch is specifically designed to stand up to extended duty applications. This switch is factory set but capable of field adjustment. It features different diaphragms for compatibility with a wide variety of ...

Basic Info Contact Type: Type c Contact Detection Method: Correlation Type Brand: Ce SGS Certification: CE, Wqa Voltage: 24V Material: Plastic Color: Black Pressure Range: 42.7psi Pore Size: 1/2" Characteristic: High Sensitivity, Stability Standard: FDA Standard Use: RO Water Purifier Parts Packing: 50PCS/CTN Product Name: High Pressure Switch for RO Water System Transport Package: 50PCS/Carton Specification: 42*33*13 cm Specification Introduction This valve usually be used in water purifier for water inlet and waste water control through 24V direct current to control the on and off of valve. Using ...

Quick Details Max. Current: 10A Max. Voltage: 10BAR Protection Level: IP65 SPECIFICATION The automatic controller for water pump is an intelligent pump control device installed on the pipeline. It can start and stop the pump according to the varied data such as water resource condition and pipeline pressure it detected. It can completely replace the traditional system constructed by pressure tank, pressure switch, water shortage protection devices, check valve and four-way valves. The particular patented check valve device can prevent the possible surging in the system. Pressure gauge ...

Quick Details Max. Current: 10A Max. Voltage: 240V Max. Working Pressure: 10bar Products name: Pump Pressure Control Power: Hydraulic Application: Water pump Starting pressure setting: 1.5bar Frequency: 50-60Hz Protection rating: IP65 Rated voltage: 220/240V Max.working temperature: 55°C Connection thread: R1" Usage: Water START-UP This electronic controller will start automatically or cut off the power when turned on or off any tap or value in the system.If a tap in the system is turned on,this controller can generate constant pressure and keep the flow normal during the water pump ...

Basic Info Application: Industrial Media: Air or Other Non Hazardous Gas, Water Proof Pressure: 50 Psi Type: Electronic Contact: Normally Open Operating Pressure Range: 20 Mbar to 1000 Mbar Operating Temperature Range: -10° C to 85° C Origin: China Introduction For equipment in wet environments, air actuated switches are the safe and economical solution. Applications range from medical operating room equipment to sewer cleaning machinery. Air actuated switches deliver complete electrical isolation with zero voltage at the point of actuation, providing critical benefits in a wet environment: 1 ...

Quick Details Max. Current: 10A Max. Voltage: 240V Max. Working Pressure: 10BAR Certificates: TUV,CE,3C Specification The automatic controller for water pump is an intelligent pump control device installed on the pipeline. It can start and stop the pump according to the varied data such as water resource condition and pipeline pressure it detected. It can completely replace the traditional system constructed by pressure tank, pressure switch, water shortage protection devices, check valve and four-way valves. The particular patented check valve device can prevent the possible surging in the ...

Basic Info Model NO.: QYKContact: Normally Open Contact Type: Type b Contact Detection Method: Reflection Type Certification: ISO9001, UL, CE, VDE TUV Thread: 3/8-24unf Male (or as Per Your Need) HP off: 3.14MPa Lp on: 0.196MPa Applicable Medium: R-134A Base: Copper Transport Package: in Carton Specification: 0.05KG Specification The automatic controller for water pump is an intelligent pump control device installed on the pipeline. It can start and stop the pump according to the varied data such as water resource condition and pipeline pressure it detected. It can ...

Basic Info Pipe Design Rate: Incremental Principle: Pilot Type Rating Voltage: 220V Waste Water Flow: 420±42ml./Mi N Medium: Water Winding Way: Duplex Winding Pressure Range: 0.02-0.8MPa(0.2-8ba R)/0 .02-1 .0 MPa(0.2-1 0bar) Ambient Temp.: -25—55°c Color: White Packing: 50PCS/CTN Product Name: Quick High Pressure Switch in RO Water System Transport Package: 50PCS/Carton Specification: 42*33*13 cm Specification Introduction This valve usually be used in water purifier for water inlet and waste water control through 24V direct current to control the on and off of valve. Using with the high or ...

Quick Details Max. Current: 10A Max. Voltage: 240V Max. Working Pressure: 10bar Specifications 1 Rated voltage: 110V-120V or 220V-240V 3 Frequency: 50/60Hz 4 Tap Screw: 1 " 5 of protection: IP65 6 Select the starting pressure: 1.5bar or 2. 7 Maximum allowable pressure: 10bar 8 Maximum ambient temperature: 60 °C USE 1. used in water systems electronic pressure switch. 2.When the pressure becomes weak (faucet open) when the corresponding open pump, or the maximum pressure in the pump under the standard, when the water flow stops (taps closed) ...

Quick Details Max. Current: 10A Max. Voltage: 220V Max. Working Pressure: 10 Bar Product name: Digital Pump Switch Description Built in pressure sensor, stable and accurate. MCU micro computer process chip, it can achieve safe and intelligent control. Automatically stops pump for water shortage and automatically works when water is supplied. Button operation, screen display of adjusted pressure, convenient and quick. Worth buying. Features Automatically stops pump for water shortage and automatically work when water is supplied. MCU micro computer process chip, safe and intelligent control. Built in ...

Basic Info Number of Switch: Multi Control Switch Usage: Control Switch Explosion-proof Type: Flameproof Contact Type: Type c Contact Operating Pressure Range: 20 Mbar to 1000 Mbar Operating Temperature Range: -10° C to 85° C Transport Package: Neutral Export Carton Structure: Power Built-in Type Application: Home, Commercial, Industrial, Vehicles Contact: Normally Open Detection Method: Retro-reflective Mode Media: Air or Other Non Hazardous Gas, Water Proof Pressure: 50 Psi Introduction For equipment in wet environments, air actuated switches/SPA air switches are the safe and economical solution. Applications range from ...

Basic Info Pressure Setting: Preset Media: Non Hazardous Gas Only Set Point: 15-2500mbar Rated Voltage: 2.5(0.5) a 250V~1e4; 20mA 250V~5e4 Proof Pressure: 3000mbar Temperature: -10c~85c Contact Material: Brass Silver Plated (Gold Plating on Request) Body Material: PA66 Terminal: 6.4mm*0.8mm Product Description pressure switch,air pressure switch,air compressor pressure switch,pump pressure switch,water pressure switch,low pressure switch,oil pressure switch,a/c pressure switch,differential pressure switch,water pump pressure switch Pressure switch LFS-03 can be is applied to detection positive or negative pressure. It can be used as a gauge or differential pressure switch with ...

Quick Details Max. Current: 25A Max. Voltage: 480V Max. Working Pressure: 3~700PSI Item Name: Pressure Switch for Air Compressor Differential Pressure Switch YK-3.5/3.0: black Automatic Reset: Manual Reset temperature control: AC240V Pressure Range: 0.02MPa~5.5MPa Applied Temperature: -30°C~+100°C Dielectric: Terminal to terminal:AC600V,10S Terminal to case:AC1500V,1min Useful life: Above 100,000times Contact Mold: single-pole single throw characteristic of voltage: accordance with the requirement of customer Application General our series pressure controller (also called pressure switch) is a more advanced mini controller in the world and is researched and designed by using ...

Quick Details Model Number: customization Product Name: Flow Indicator Size Range: DN6mm to DN100mm Max Operating Pressure:: 1.5MPa/16Bar Medium: Oil/Liquids/Solvent/Steam Material: 304 Stainless Steel/PTFE/Tempered Glass Thread Standard: NPT,BSPP,BSPT Customization: Available MOQ: one piece Production Process: Mold Casting Delivery Time: Within Seven Days(100Pcs) he impeller indicator is also known as a necessary accessory for observing the flow of medium in the pipe. Impeller sight glasses are widely used in petroleum, chemical, chemical fiber, medicine, food and other industrial production equipment, can observe the flow of liquid, gas, steam medium ...

Quick Details Model Number: FS-M-PSS02 Series Media Type: Liquid Operating Temperature: -30℃~100℃ Media temperature: -30°C~100°C Storage temperature: -30°C~85°C Output: SPST magnetic switch normally open or normally closed output Magnetic switch parameters: 1A(max),110VAC/DC,50W(MAX) Cable: Standard Configuration 0.5m, Gawain line 2*0.3mm2 Withstand voltage: 30bar, (100bar can be customized) Housing protection grade: IP65 Weight: 135G Connection: G1/2'' Product description Working principle Piston type flow switch is composed of a column core, a reset spring, wrought copper or poly carbon shell and the sensor parts. The shell is POM plastic or stainless steel 316L, Core using neodymium iron boron permanent magnetic material, and sensor magnetic switch is power components. The interface of water inlet and the outlet is standard pipe thread, thread optional. Piston type flow switch is for electric water heater, solar water heaters, air conditioners and other water system of water circulation control, water control, water heating control, water pump switch control, electromagnetic valve on-off control or water power, water power control process. When reach a certain flow,it will transmit water flow into sensor parts of switch signal. Application for examples Piston type water flow switch FS-M-PSS02 series is developed for the field of non-air-conditioned. In the flow switch, there is a high-performance permanent magnet mounted, which ...

Quick Details Model Number: TFS water flow switch price Media Type: water flow switch price Operating Temperature: -20~80℃ Flow Rate: 1~150cm/s(water),3~300cm/s(oil) Application: Monitor Liquid Flow water flow switch price Output: relay(SPDT),PNP,NPN transistor Material: SUS304/316 Medium: Caustic Liquid Protection: IP67 Pressure rating: 10MPa Product Description Flow switch is a kind of real-time monitoring of the liquid flow in the pipeline, and the output signal measuring instrument. This product adopts all metal housing, no moving parts, the switch quantity can be continuously adjustable, pressure loss is small, compact structure, a ...

Quick Details Material: POM Food Grade Color: White Flow Range: 0.25-2.5L/min Connection: 6mm, straight structure specifictation: 80*42*32mm or 62*42*32mm Flow conversion: 1L Water=2653 pulse pressure performance: 0.8MPA Line specification and install direction: could be Customized water temperature: less than 60 ℃ insulated resistor: >100MΩ Technical parameter 1.Water quality requirement: Drinking water health standards, 0～60℃ 2.Flow range: 0.25～2.5L/min (three types to be optional) 3.Withstand hydraulic pressure: ≤0.8MPa 4.Voltage/electric current: DC4.5～18V,≤10mA; can be customized DC24V 5.Insulation resistance: >100MΩ 6.Electrical strength: AC500V,50HZ 7.Output level: Rated voltage DC5V,high level ≥4.3V,low level ≤0.5V ...

Quick Details Product Name: Brass Hall Turbine flow sensor meter switch control water Flow Rate: 1~25 L/min Flow Pulse: F= 11 *Q ± 5% , Q=L/min Working Voltage: DC3V-24V Working Current: 15mA Suffering Pressure: Max: 1.5MPa Working Temperature: -40 °C ~+80 °C, Min Insulation Resistance: 100M Ohm Application: Water heater, broiler and heat pump ...etc. Description The water flow sensor is a device used to sense the water flow rate in a tank. There is a Hall element in the flow sensor. When liquid flows by the sensor, ...

Quick Details Media Type: Liquid Operating Temperature: 121°C Flow Rate: 1-100L/min Control Type: Paddle Pipe connector: 1 in. 11-1/2 NPT Threads Liquid temperature: 0~121℃ Electrical ratings: 120VAC; 208VAC; 240VAC; 277VAC liquid flow switch: Paddle Flow Switch Product description 1, Type: Bingo 2, Pipe connector: 1 in. 11-1/2 NPT Threads 3, Switch contact: SPDT 4, Bellow pipe / blade: phosphor bronze / stainless steel 5, Blade: detachable 1”, 2”, 3” blades and 6” blade ( uninstalled) 6, Liquid temperature: 0~121℃ 7, Max. Liquid pressure: 1034 KPa 8, Electrical ratings: 120VAC; 208VAC; 240VAC; 277VAC 9, Full load current (A): 16.0; 8.8; 8.0 10, Transient current (A): 96.0; 52.8; 48.0 11, Non-inductive current (A): 16.0 12, other: NEMA 1 shell Our Services 1. Delivery time is 5~7 days for sample and 15 working days for bulk order; 2. Strong production capacity and strict quality control system; 3. Your inquiry and problems related to our products or prices will be ...